U-shape drains & utility ducts
Factory-smooth U-drains, covered utility ducts, and FT flumes sized for roadside edges through heavy vehicle corridors.
Drains & ducts in context
Reference views for sizing conversations and site planning.
More discharge in less land width starts with a smoother drain surface. Our U-shape drains and utility ducts are manufactured for a low Manning’s coefficient, high strength, and water-tight jointing — so stormwater and service corridors install cleaner and faster than site casting.
Choose the section that matches the road: T6 for kerb-edge pedestrian / LMV zones (about 300×300 mm to 900×900 mm), T25 for in-road runs with heavier wheel loads (about 300×300 mm to 1200×1200 mm), or FT flume for larger edge channels (about 600×800 mm to 2500×1800 mm) with flange-bolt options.
Lids are part of the system — put-on or drop-in styles with anti-skid finish, plus perforated lids for stormwater or solid lids for cable ducts — so you do not need a second paving trade just to finish the cover.
What you can count on with this product line
T6, T25, and FT flume size ranges
Specified and finished for real site conditions.
Smooth factory surface for higher flow efficiency
Specified and finished for real site conditions.
Pedestrian, LMV, and heavy-vehicle loading options
Specified and finished for real site conditions.
JIS-style joint grooves and sealant-ready connections
Specified and finished for real site conditions.
Perforated or solid lids for drains vs cable ducts
Specified and finished for real site conditions.
Inbuilt lifting inserts for safer handling
Specified and finished for real site conditions.
Inquire about drains & ducts
Call +91 997 412 5431 or send site details — location, approximate length, and preferred height or section size.